Air Duct Cleaning in Flower Mound - Flat Price Per System, No Per-Vent Upsells

Air Duct Cleaning in Flower Mound, TX

HVAC cleaning in Flower Mound typically runs $380-$680 for a whole-home system, with most jobs scheduled within a week and completed in a single day. The town’s 1990s-2000s production housing stock, heavy tree canopy, and aging flex-duct systems create contamination patterns we don’t see in neighboring cities. We’re CleanRun, and we dispatch crews to Flower Mound from our Dallas-Fort Worth office. Call (469) 452-7766 for a written estimate before any work starts.

Call (469) 452-7766

Why Flower Mound Homes Are Different

Flower Mound’s city-mandated tree preservation ordinance produced an unusually dense canopy of Eastern red cedars, cedar elms, and post oaks that most DFW suburbs this size simply don’t have. That canopy drives heavier pollen and mold-spore loads into HVAC systems, especially during mountain cedar season from December through February and again during the oak and cedar elm surge in spring.

The housing stock compounds the problem. Most Flower Mound homes went up between 1992 and 2008, large two-story builds with two or three HVAC zones and extensive flexible ductwork snaking through hot attics. At 20-30 years old, that flex duct shows heat and UV degradation on the outer jackets, and plenum connections develop partial separations that let unfiltered attic air bypass the return entirely. The black clay soils at the edge of the Blackland Prairie add fine particulate dust during summer dry spells, which infiltrates those aging connections and settles in flex-duct low spots. In older master-planned sections near the Mound itself, we regularly find return-air boots packed with decomposed organic debris mixed with clay dust, a residue profile that looks nothing like the drier, sandier buildup in Denton County systems just a few miles north.

Our Main Flower Mound Services

Three services account for most of our calls from Flower Mound homeowners. Each has its own page with full pricing and scope details.

Air Duct Cleaning in Flower Mound

We clean every duct run with negative-pressure extraction, photographing the interior before and after each pass. In Flower Mound, the combination of heavy pollen seasons and 20-30-year-old flex duct means we often find significant debris accumulation at plenum connections and low spots where the duct sags in hot attics. Air Duct Cleaning in Flower Mound includes the full Documented Photo Record as standard.

Dryer Vent Cleaning in Flower Mound

Dryer vents in Flower Mound’s larger homes frequently run 15-25 feet through exterior walls with multiple elbows, and the town’s lint-heavy debris profile, mixed with clay dust and organic matter, creates blockages that standard brushes miss. We use rotary whip systems and verify airflow at termination. Dryer Vent Cleaning in Flower Mound includes written scope and photo documentation.

Duct Repair & Sealing in Flower Mound

Aging flex-duct outer jackets and separated plenum connections are the most common failures we find in Flower Mound’s 1990s-2000s housing stock. We replace damaged sections with new insulated flex or rigid duct where appropriate, seal connections with mastic, and pressure-test the system before closing. Duct Repair & Sealing in Flower Mound is quoted with a written price before any demolition begins.

Before

After

HVAC Cleaning in Flower Mound

Full HVAC Cleaning in Flower Mound addresses the compounding contamination problem that is genuinely distinctive to this town: heavy seasonal pollen loads from the dense tree canopy, combined with 20-30-year-old flex-duct systems now showing heat degradation and partial plenum separations. The result is biological and particulate debris that bypasses filtration, coats heat-exchange surfaces, and reduces airflow capacity in systems already stressed by 150°F attic temperatures in July. We clean the components that standard duct cleaning cannot reach.

Evaporator Coil Cleaning

Signs you need it

Ice buildup on the refrigerant lines, weak airflow from registers, or a musty odor when the AC cycles on in Flower Mound’s humid summer months.

What it costs in Flower Mound

Evaporator coil cleaning typically runs $280-$420, depending on accessibility and contamination level.

How we do it

We remove the blower assembly to access the coil, apply foaming cleaner, rinse with low-pressure water, and photograph the coil surface before and after.

Blower Cleaning

Signs you need it

Uneven heating or cooling across zones, a humming motor working harder to maintain setpoint, or visible dust ejection when the system starts.

What it costs in Flower Mound

Blower cleaning typically runs $220-$340 for standard residential units.

How we do it

We remove the blower assembly, clean the squirrel cage and motor housing with compressed air and solvent, balance the wheel, and reinstall with torque verification.

What HVAC Cleaning Costs in Flower Mound

How do I know if my HVAC needs cleaning or just my ducts?

If you have weak airflow, temperature imbalance between floors, or musty odors specifically when heating or cooling cycles on, the problem is likely in the HVAC components, not the duct runs alone. Call (469) 452-7766 and we’ll scope both to show you the difference.

Can HVAC cleaning fix the humidity problems in my Flower Mound home?

Cleaning a dirty evaporator coil restores its ability to condense and drain moisture properly, which often reduces indoor humidity by 8-15%, but it cannot correct an undersized system or poor duct design common in 1990s production builds. We’ll tell you which problem you actually have.

Air Quality & Sanitizing in Flower Mound

Air Quality & Sanitizing in Flower Mound targets the biological load that the town’s dense tree canopy forces into residential HVAC systems. Mountain cedar season from December through February and the spring oak and cedar elm surge deposit pollen and mold spores that colonize damp duct surfaces, particularly in aging flex-duct systems with partial plenum separations that bypass filtration entirely. The result is not just odor but active microbial growth that standard cleaning cannot address without targeted treatment.

Mold Treatment

Signs you need it

Visible black or green growth on register faces, a persistent earthy odor when the system runs, or recent water intrusion into ductwork from a roof leak or condensate overflow.

What it costs in Flower Mound

Whole-system mold treatment typically runs $450-$780, depending on contamination extent and duct accessibility.

How we do it

We apply an EPA-registered antimicrobial through the duct system under negative pressure, treat the evaporator coil and plenum directly, and provide laboratory-grade post-treatment verification where required.

UV Light Installation

Signs you need it

Recurring mold or bacterial growth despite cleaning, family members with respiratory sensitivity, or a system located in a damp crawl space or basement.

What it costs in Flower Mound

UV-C light installation typically runs $380-$620 per air handler, including the lamp, housing, and electrical connection.

How we do it

We mount a Honeywell or Aprilaire UV-C lamp downstream of the evaporator coil, wire to the blower circuit for automatic cycling, and show you the installation before closing the panel.

What Air Quality & Sanitizing Costs in Flower Mound

Does UV light actually kill mold in Flower Mound’s humid climate?

UV-C light at 254 nanometers destroys mold spores and bacteria at the cellular level, but it only works on airborne organisms that pass the lamp, so we position it at the coil, where moisture and organic debris create the primary colonization site in Flower Mound systems. Call (469) 452-7766 for a written assessment of whether your configuration supports effective treatment.

How do I know the mold treatment worked?

We photograph every treated surface before and after, provide those images as part of the Documented Photo Record, and can arrange third-party air sampling at your request, though we do not perform our own lab analysis to avoid conflict of interest. The 365-Day Done Right Promise covers any recurrence in treated areas.

Brands We Service in Flower Mound

We stock parts and service equipment from Honeywell, Aprilaire, Nikro, and Abatement Technologies, with common filters, UV lamps, and coil cleaners carried on every Flower Mound truck. Most replacement components are available same-day; specialized Aprilaire media and Honeywell electronic air cleaner cells typically arrive within 24 hours from our Dallas-Fort Worth office. our brands

Pricing for Air Duct Cleaning in Flower Mound, TX

Neighborhoods We Serve in Flower Mound

We schedule Flower Mound jobs from our Dallas-Fort Worth office with routes planned to minimize drive time across the town’s spread-out master-planned developments. Most appointments are available within 5-7 business days, with limited next-week slots for documented respiratory urgency.

• Timbercreek Canyon
• Bridlewood
• Stone Hill
• Chateau Du Lac
• The Lakes

Service Area - Cities Near Flower Mound

Our crews cover the full Dallas-Fort Worth metro from the same dispatch office, with regular routes through Lewisville, TX, Carrollton, TX, Frisco, TX, and Richardson, TX in addition to Flower Mound. Written estimates and the same equipment roster apply across all service areas.

FAQs About Air Duct Cleaning in Flower Mound