Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Dryer Vent Cleaning Across Richardson
Dryer vent cleaning in Richardson typically runs $149-$289 for a standard single-family vent run, with rerouting or bird guard installation adding $75-$150 depending on access and materials. We’re usually on-site in Richardson within 24-48 hours of scheduling, and every job starts with a written price before a single tool comes out of the van. Call (469) 452-7766 for a free estimate with no obligation.
We’ve been working in Richardson since 2013, and our crews know the difference between a 1968 ranch off Campbell Road and a 1980s split-level in Canyon Creek. The housing stock here is old enough to have real problems and established enough that homeowners expect documentation, not hand-waving. That’s why our Dryer Vent Cleaning team photographs every vent run before and after, and every customer gets that photo record as a standard deliverable. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, but the trucks serving Richardson are stocked and routed locally.
Why CleanRun Air Duct Cleaning Plano Is Richardson’s Preferred Dryer Vent Cleaning Company
Richardson homeowners research before they call. We respect that. Our reputation here is built on verifiable facts: 52,000+ homes served since 2013, every one with a written price agreed before work started and a documented photo record delivered at completion. No exceptions. Haven Standard Clause 1.
Reviews from Richardson customers consistently mention the photo record. One homeowner in the Greenwood Hills area wrote that our technician “showed me the lint packed at the first elbow before he touched anything - I knew exactly what I was paying for.” Another in Richland Park noted that our crew “arrived in a marked van, uniformed, and called 20 minutes out - Haven Standard Clause 3: Verified Crews, actually enforced.”
Response time to Richardson averages same-day or next-day availability for standard scheduling, not because we rush but because we route trucks from the metro office with Richardson-specific parts and equipment. That matters when your vent run uses older 4-inch aluminum flex that most big-box stores no longer stock.
Our local knowledge runs deeper than zip codes. We know which Richardson neighborhoods sit on the worst Blackland Prairie clay heave zones, where the original 1960s slab penetrations are most likely to have shifted, and which exterior vent cap designs fail fastest under North Texas pollen loads. That expertise shows up in the diagnosis, not the marketing.
Our Dryer Vent Cleaning Services in Richardson
Dryer Vent Inspection
Every Richardson job starts with a full vent run inspection using a borescope camera. We feed the camera through the entire duct path - from the dryer’s transition hose to the exterior cap - and the homeowner watches the screen in real time. In Richardson’s older ranch homes, we’re specifically looking for slab-heave separation at the wall or floor penetration, crushed flex behind the dryer, and back-pressure readings that exceed manufacturer limits. The inspection produces a written finding sheet with photo stills, which becomes the basis for the written price quote. No work proceeds without both documents signed.
Vent Cleaning
Our vent cleaning process uses negative-pressure extraction (a vacuum system that pulls debris out rather than blowing it inward) combined with mechanical brushing. For Richardson homes, this matters because the lint we find here is often compacted by years of restricted airflow from partially separated duct runs, not just surface accumulation. We clean the full run: transition hose, interior duct, elbow joints, and exterior cap. The job concludes with airflow and temperature measurements at the dryer exhaust, documented in the photo record. Equipment includes Rotobrush and Nikro systems - brands any homeowner can look up and verify.
Lint Removal
Lint removal sounds simple until you’ve seen what accumulates in a Richardson vent run that’s been partially disconnected for three years. We remove lint from the entire system, including the cavity behind the dryer where the transition hose connects. In homes near unpaved roads or open land on Richardson’s rural fringe, we also find pollen, fine dust, and occasionally rodent nesting material that entered through a failed exterior flap. Our techs bag and remove all debris; nothing gets pushed into wall cavities or left in your laundry room.
Vent Rerouting
Rerouting is common in Richardson, and often necessary. The original vent path in a 1970s ranch may have been acceptable by 1975 standards but creates excessive back-pressure with modern dryers that run hotter and faster. We reroute with rigid metal duct (not flex) where possible, reducing elbow count and total run length to manufacturer specifications. Haven Standard Clause 2: Written Scope - the reroute plan is drawn, priced, and signed before cutting begins. For outbuilding or detached-garage laundry setups common on Richardson’s eastern and northern edges, rerouting often means replacing a 30-foot under-insulated flex run with a shorter, supported rigid path.
Bird Guard Installation
Richardson’s mature tree canopy attracts birds, and a dryer vent cap without a guard is an invitation to nest. We install Guardsman bird guards - steel mesh screens that block entry without restricting airflow - on any exterior cap where the homeowner approves. In pollen-heavy areas near Breckinridge Park or the creek corridors, we also check that the guard mesh isn’t already clogged with debris that would choke airflow. The guard is photographed installed, and the warranty covers both the guard and the installation workmanship.
Vent Cap Replacement
Exterior vent caps in Richardson take a beating: UV degradation, pollen caking, and physical damage from lawn equipment or settling soil. We stock replacement caps in standard 4-inch configurations and can match most existing siding penetrations. If the cap has been missing or stuck open, we inspect the duct interior for rodent or insect intrusion before sealing the new unit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Richardson
CleanRun crews arrive with professional-grade equipment from trade-recognized brands: Rotobrush and Nikro for mechanical brushing and negative-pressure extraction, Abatement Technologies for HEPA containment on jobs with heavy biological loading, and Guardsman for bird guards and exterior hardware. We stock Guardsman bird guards and standard vent caps locally for Richardson jobs, so replacement doesn’t require a second trip. Homeowners can verify each manufacturer’s specifications independently - we name the brands precisely so you can.
Common Dryer Vent Cleaning Problems We See in Richardson Homes
- Slab-heave separation hiding lint in floor cavities. Richardson’s expansive Blackland Prairie clay causes chronic slab movement, and in 1960s-70s ranch homes this frequently severs the dryer vent at the slab or wall penetration. Lint collects in the gap beneath the floor, invisible until a borescope finds it. The dryer runs longer, hotter, and eventually fails - but the lint trap looks clean.
- Outbuilding runs exceeding back-pressure limits. Rural-edge properties around Richardson often have laundry in detached garages or outbuildings with 25- to 35-foot vent runs through unconditioned space. Manufacturer back-pressure limits are typically 0.4 inches water column; these long runs routinely exceed 0.6, choking airflow and overheating the blower motor.
- Pollen and dust caking exterior caps and bird guards. Unpaved approaches and open land on Richardson’s fringe load exterior hardware with fine debris faster than paved subdivisions. Flaps stick open, inviting rodents. Screens clog, restricting airflow. The cap looks fine from the ground and isn’t.
- Original aluminum flex deteriorating behind the dryer. The transition hose from dryer to wall is the most abused segment in any vent run. In Richardson’s older homes, original flex is often kinked, crushed by the dryer’s weight, or partially disconnected - a fire hazard that a lint-trap cleaning never reaches.
Pricing for Dryer Vent Cleaning in Richardson, TX
Standard dryer vent cleaning in Richardson runs $149-$189 for a single-story home with straightforward access and a vent run under 15 feet. Second-story or through-roof exits add $30-$50 for ladder work and extended tooling. Vent rerouting with rigid metal duct: $225-$375 depending on linear feet and elbow count. Bird guard installation: $75-$125 per cap, including hardware. Outbuilding or long-run jobs requiring additional back-pressure testing and potential booster fan recommendation: $275-$425.
What moves the price: total run length, number of elbows, access difficulty (crawl space, attic, through-roof), and whether rerouting or cap replacement is needed. What doesn’t move the price: number of loads you run per week, how “bad” it looks, or whether we find a surprise. The written price agreed before work starts is the price on the invoice. Haven Standard Clause 1. No per-vent pricing, no add-ons after arrival.
Every estimate is free. Bring a competitor’s written quote and we’ll provide a Free Second Opinion, our number next to theirs, no obligation.
We Also Serve Cities Near Richardson
Our crews work throughout the northern Dallas-Fort Worth metro, including Dryer Vent Cleaning in Richardson and surrounding communities: Plano, Garland, Carrollton, and Allen. Each city gets the same written-price-first protocol and documented photo record, with routing optimized from our local dispatch.
Serving Richardson, TX - Our Local Coverage Area
We’re based in the Richardson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Dryer Vent Cleaning in Richardson
Every 12-18 months for standard in-home setups; every 8-12 months for rural-edge properties with outbuilding laundry, unpaved road access, or heavy pollen exposure. The clay-soil slab movement common in Richardson’s 1960s-1980s housing stock means partial separations can occur between cleanings, so we recommend annual inspection even if the vent was clear last year. Call (469) 452-7766 to schedule - estimates are free.
The Blackland Prairie expansive clay beneath Canyon Creek and similar 1960s-70s subdivisions heaves and settles with seasonal moisture changes, physically shifting the slab and pulling duct connections apart at the wall or floor penetration. This is a soil mechanics problem, not a maintenance problem - the fix is rigid metal rerouting with a floating connection at the slab, not another flex patch. We document the separation with photos and provide a written reroute scope before cutting. Call (469) 452-7766 for an inspection.
No. The lint trap catches roughly 25-30% of lint produced per load; the remainder travels into the vent run. In Richardson homes with partially separated ducts from slab movement, that remainder may be collecting in your floor cavity rather than at the exterior cap - the lint trap looks fine while the hazard builds out of sight. A borescope inspection is the only way to know where the lint actually went. Call (469) 452-7766 for a full vent run check.
Yes. We install Guardsman steel-mesh bird guards on any exterior dryer vent cap, priced at $75-$125 including hardware and installation. Richardson’s mature tree canopy and creek corridors attract nesting birds, and an unguarded cap is a common entry point. The guard is photographed installed and covered under our 365-Day Done Right Promise. Call (469) 452-7766 to add a guard to your next cleaning or as a standalone visit.
Probably. Most dryer manufacturers specify maximum vent runs of 25 feet with each 90-degree elbow reducing that limit by 5 equivalent feet. A 30-foot straight run or a 25-foot run with one elbow typically exceeds back-pressure limits, causing longer dry times and premature blower failure. For Richardson properties with outbuilding laundry setups, we measure actual back-pressure and reroute to manufacturer spec if needed. The test and written recommendation are included in the inspection. Call (469) 452-7766 for a back-pressure reading on your specific run.
We were called to a 1972 split-level off Canyon Creek Drive after a homeowner’s new dryer kept tripping its thermal fuse on every third load. Pulling the vent run, our tech found the aluminum flex connector had separated about eight inches down from the wall cap where slab movement had sheared the seam, and roughly two feet of packed lint and dryer sheet debris were sitting in the gap. We rerouted the run with rigid metal and a Guardsman bird guard on the exterior cap, and the dryer has run cooler since.
Because Richardson’s expansive Blackland Prairie clay causes slab movement, dryer vents in 1960s-70s ranch homes here frequently separate at the slab penetration or pull loose where the vent run meets the wall, depositing lint into the void under the floor rather than at the exterior cap. In Frisco or Allen, where the soil and slabs are newer and more stable, that below-slab lint migration is virtually unheard of. This is the specific failure mode our crews are trained to find, document, and fix - not patch, but correct with rigid rerouting and proper support.
Ready for a written estimate? Call (469) 452-7766 to speak with a live person, 24/7. We’ll schedule a Richardson visit, inspect your full vent run with camera documentation, and provide a fixed written price before any work begins. Every job is backed by our 365-Day Done Right Promise and the full H.A.V.E.N. Standard.
Written by Tomas Reyes, Owner at CleanRun Duct Repair & Cleaning, serving Richardson and the Dallas-Fort Worth metro since 2013.